Fence Installation Cost in Jacksonville (2026)

Starting July 1, 2026, Florida HB 803 exempts residential fence projects valued under $7,500 from local permit requirements, provided they are not in a flood hazard area. For projects over $7,500 or in flood zones, a permit from the Jacksonville Building Inspection Division is required, typically costing $2.00 per $1,000 of project value.

Standard regulations in Jacksonville allow for a maximum height of 6 feet in rear and side yards, and 4 feet in front yards. In certain cases, backyard fences can reach 8 feet with an administrative deviation, though corner lots must maintain a 'visibility triangle' for traffic safety.

Vinyl (PVC) is the most popular choice in Jacksonville due to high humidity and termite activity, costing between $33 and $55 per linear foot installed. While pressure-treated pine is cheaper at $15-$28 per foot, it requires staining every 2-3 years to prevent rot in the Florida sun.

For a typical 150-linear-foot project using pressure-treated pine, Jacksonville homeowners can expect to pay between $3,100 and $5,150. Upgrading to Western Red Cedar increases the estimate to approximately $5,700 to $8,250 due to higher material costs.